You are here: Home » Products » HDPE Micro Duct » HDPE Pipe Micro Duct 7-ways 22/18 - 16/12 - 14/10- 12/8 -10/6 mm for Underground Fiber Optic Cable

loading

Share to:

HDPE Pipe Micro Duct 7-ways 22/18 - 16/12 - 14/10- 12/8 -10/6 mm for Underground Fiber Optic Cable

With HDPE as the main material , it has good mechanical performance to provide the adequate protection for cable.
Solid,permanent sillicon lubricant layer of inner wall effciently lowers the inner wall friction coefficient to benefit for the long distance cable blowing.
Silicon layer is co-extruded into the inner wall of piping, cable in the pipe can be repeatedly drawn off without being peeled off or broken away.
Availability:
Quantity:
  • HDPE Sub Duct (HDPE03)

  • Fulsan

  • 854442

  • 14/12mm 12/10mm,40/30mm etc

HDPE Pipe Micro Duct 7-ways 22/18 - 16/12 - 14/10- 12/8 -10/6 mm for Underground Fiber Optic Cable

  

  •  With HDPE as the main material , it has good mechanical performance to provide the adequate protection for cable.

  • Solid,permanent  sillicon lubricant layer of inner wall effciently lowers the inner wall friction coefficient to benefit for the long distance cable blowing.

  • Silicon layer is co-extruded into the inner wall of piping, cable in the pipe can be repeatedly drawn off without being peeled off or broken away.



The HDPE micro duct for installation of fiber optical cable blowing, is a kind of small, flexible, lightweight tube with an outer diameter typically less than 16.0mm.

The micro duct has a circular and uniform in cross-section throughout its length, its inner surface have a low coefficient of friction, and longtitudinal ribbed inner wall, to reduce the inner friction coefficient of the micro duct so as to be beneficial to cable blowing.


Micro ducts of high density polyethylene with HDPE as the main raw material, are the composite pipe with inner wall made of silicon material lining made by the advanced plastic extrusion forming technology, the inner wall of this duct is a solid permanent lubrication layer, which has self lubricity and effectively reduce the friction resistance between the cable and duct when the cable is repeatedly extracting in the duct.

Micro ducts of high density polyethylene with HDPE as the main raw material, are the composite pipe with inner wall made of silicon material lining made by the advanced plastic extrusion forming technology, the inner wall of this duct is a solid permanent lubrication layer, which has self lubricity and effectively reduce the friction resistance between the cable and duct when the cable is repeatedly extracting in the duct. The application of micro duct products, combined with micro optical cable and air blown cable technology, makes the construction of communication optical cable pipeline network flexible, economical and efficient, and solves the current situation of tight and difficult construction of pipeline resources.

The data sheet of basic properties of micro duct: 

INNER TUBES

Materials

HDPE (High-density Polyethylene)

Diameter

14/10mm

Color options

Fully colored

Color

White, blue, red, green, yellow, brown, grey

Inner surface

ribs with silicon

Layer

2

Numbers

7




OUTER SHEATH

Materials

HDPE (High-density Polyethylene)

Thickness

1.2mm (Nominal)

Diameter (min./max.) 

40.6mm / 44.4mm

Color

Orange

Spec. O.D. I.D. Wall Thickness SDR Nom. Nass Min. Bend Rad. Max. Pull Force Drum length
(mm) (mm) (mm) (kg/km) (mm) (kg) (N) (m)
MD0535 5.0 3.5 0.75 6.7 10 60 18 180 3000
MD0735 7.0 3.5 1.75 4.0 28 84 52 520 3000
MD0806 8.0 6.0 1.0 8.0 22 96 38.5 385 2000
MD1006 10.0 6.0 2.0 6.0 49 120 90 900 2000
MD1008 10.0 8.0 1.0 10.0 28 120 51 510 2000
MD1208 12.0 8.0 2.0 6.0 61 144 112 1120 2000
MD1210 12.0 10.0 1.0 10.0 34 144 62 620 2000
MD1410 14.0 10.0 2.0 7.0 74 168 135 1350 1500
MD14115 14.0 11.5 1.25 11.2 49 168 90 900 1500
MD1612 16.0 12.0 2.0 8.0 84 192 158 1580 1500

hdpe 24HDPE 02HDPE 2HDPE 4HDPE 13HDPE 16HDPE 17

Previous: 
Next: 
Product Inquiry

Product Category

Products

About Us

Contact Us

Email: sales@fulsan.com.cn
Airline number : +86-574-87115939
Phone number : +86-13757461063
Address:A-4,No.118Xiangcheng Road,Gaoqiao,HaishuDistrict, Ningbo,China
Focus Us
Copyright ©Ningbo Fusan Technology Co., Ltd.Technology by leadong.com