UTP/ FTP cat5e cat6 patch panel
1. Adapt Snap-in way to install its module disposition has higher flexibility and suitability. The window of the label is furnished with removable label one, help users manage.
2. The round rear rough part protect the wire drop off and broken
3. The jacks can be changed
4. Insulation Resistance: 10 MΩ min ; 1000V 60HZ,1 min.
5. Contact Resistance: initial 20MΩ typical
6. Operating Temperature Range : -10 to 60
7. Scope of Application: 24-26AWG
8. Plug /Jack Contact Force: 100g min
10. Humidity: 5 to 93%( non condensing)
110, Krone, Dual IDC is optional
12,24,48 Port is optional
3,6,15.30,50 u is optional
UDP or FTP isoptional
Accept OEM or ODM
2.Rear cable management provides good protechtion for horizontal cable with nylon tie.
and makes cable more clearly,helps control cable bend radius and securely retains wires.
3.Directly installed in 19" cabinet
4.Fully comply with and exceed TIA/EIA-568-8 & IEC 11801 Cat5e connect hardware requirements
|Electrinic||Voltage Rating :125 VAC RMS|
|Current Rating : 1.5AMP|
|Contact Resistance:110 Milliohs MAX.|
|Insulation Resistance:1 000 megohms MIN 500 VDC|
|Dielectric Strength :750 VAC RMS 60Hz ,1 MIN|
|Environment||Storge: -40~ 85°c|
|Contact: Phosphor Bronze with gold Plating|
|RJ45 Jack:IFE:750 times MIN.|
|IDC Life :200 times MIN.|